Round Broiler Non-Rotational
Standard Features
- 14 Gauge stainless steel body
- Left and right side gas valves
- Removable drip pans
- Fully welded 14 gauge stainless steel fire box
- Ceramic cloth insulated perimeter
- 1/2’’ Thick laser cut removable steel grates
- Heavy duty locking swivel casters
- 1’’ gas connection
- Appropriate regulator for gas type selection
- Two year warranty parts and labor
| Option Code | Description |
|---|---|
|
GP |
1/2’’ POLISHED GRIDDLE PLATE |
|
FQD |
GAS FLEX QUICK DISCONNECT |
|
RPS |
REMOVABLE PLATE SHELF 10’’ |
|
PSC |
PLATE SHELF 1/6 PAN
W/CONDIMENT INSERT |
|
FF |
FEATURE FLAME |
Specifications
The CHAR Round Broiler uses gas fuel. Available in 48’’ and 60’’ diameters. The unit serves as a heavy duty broiler and can function as a griddle when equipped with the high polished 1’’ thick removable stainless steel griddle plates. These units are equipped with heavy duty cast lift out burners and radiant panels. To ensure peak performance and longevity, these units are constructed entirely from 304 stainless steel and contain a ceramic cloth insu-lated exterior.
• Must select diameter 48,60 inch diameters
• Must select fuel type (NG) for Natural Gas (LP) for Propane
• Must select diameter 48,60 inch diameters
• Must select fuel type (NG) for Natural Gas (LP) for Propane
| Model # | Diameter A | Gas Line Size | Electrical | Electrical | BTU Input NG | BTU w/ Feature Flame | Shipping Weight (Estimated) |
|---|---|---|---|---|---|---|---|
|
CP-GFG-RB-48-__ |
48″ |
1″ |
120V-1PH-8A |
120V-1PH-10A |
198,000 |
228,000 |
1,200 LBS. |
|
CP-GFG-RB-60-__ |
48″ |
1″ |
120V-1PH-8A |
120V-1PH-10A |
222,000 |
252,000 |
1,550 LBS. |
Installation Instructions
1. A properly sized gas line must be provided. All units are internally regulated. DO NOT DUAL REGULATE.
2. An adequate ventilation system is required for commercial use.DO NOT ATTEMPT TO OPERATE THIS EQUIPMENT WITHOUT IT.
3. Observe all local and national codes.
4. Proper combustion requires this unit to remain on 6’’ casters
5. This appliance is manufactured for commercial use ONLY. It is NOT intended for residential indoor use.
6. We upgrade our products regularly and in doing so, materials, specifications, and model numbers are subject to change without notice.
2. An adequate ventilation system is required for commercial use.DO NOT ATTEMPT TO OPERATE THIS EQUIPMENT WITHOUT IT.
3. Observe all local and national codes.
4. Proper combustion requires this unit to remain on 6’’ casters
5. This appliance is manufactured for commercial use ONLY. It is NOT intended for residential indoor use.
6. We upgrade our products regularly and in doing so, materials, specifications, and model numbers are subject to change without notice.
